Journal of Applied and Computational Mechanics

Author Index

A

  • Abboudi, Said Impact of the Narrowing System at Different Locations and ‎Heights on the Performance of a Plane Solar Collector [Volume 8, Issue 4, 2022, Pages 1445-1455]
  • Abd Alaal, Faisal E.I. Numerical Investigations of the Coupled Nonlinear Non-homogeneous Partial Differential Equations [Volume 8, Issue 3, 2022, Pages 1054-1064]
  • Abdalla, Hassan Mohamed Abdelalim Direct Transcription Approach to Dynamic Optimization Problems in Engineering [Volume 8, Issue 2, 2022, Pages 605-616]
  • Abdul Gaffar, Shaik Polymeric Dissipative Convection Flow from an Inclined Plane with Chemical Reaction: Numerical Study [Volume 8, Issue 2, 2022, Pages 416-428]
  • Abdul Hakeem, A.K. Heat Transfer of Hybrid-nanofluids Flow Past a Permeable Flat Surface with Different Volume Fractions [Volume 8, Issue 1, 2022, Pages 21-35]
  • Abilkhair, Zhastalap Computational and Experimental Study of the Composite ‎Material for the Centrifugal Pump Impellers Manufacturing [Volume 8, Issue 4, 2022, Pages 1407-1421]
  • Abolhasani, Hormoz Twin Screw Expanders Profile Optimization Using Surrogate-‎Based Modelling [Volume 8, Issue 4, 2022, Pages 1141-1153]
  • Addessi, Daniela Computational Enhancement of a Mixed 3D Beam Finite Element with Warping and Damage [Volume 8, Issue 1, 2022, Pages 260-281]
  • Ahangarpour, Ameneh A New Modified Hamilton-Crosser and Nan Models for Thermal ‎Conductivity of Different Lengths Carbon Nanotubes Water-‎based Nanofluids [Volume 8, Issue 3, 2022, Pages 831-837]
  • Ahmadi, Farshid Design, Analysis and Manufacturing of a Bone Cutting Ultrasonic Horn-Tool and Verification with Experimental Tests [Volume 8, Issue 2, 2022, Pages 438-447]
  • Ahmadi, Mohammad Hossein Hydrodynamic Behavior in Solar Oil Heat Exchanger Ducts Fitted ‎with Staggered Baffles and Fins [Volume 8, Issue 3, 2022, Pages 774-790]
  • Ahmadzadehtalatapeh, Mohammd Optimization of Air Distribution Patterns by Arrangements of ‎Air Inlets and Outlets: Case Study of an Operating Room [Volume 8, Issue 3, 2022, Pages 809-830]
  • Ahmed, Khaled I. Free Vibration Analysis of 2D Functionally Graded Strip Beam using Finite ‎Element Method‎ [Volume 8, Issue 4, 2022, Pages 1422-1430]
  • Ahmed, Munshoor A Kinetic Flux-vector Splitting Scheme for Two-layer Shallow Flow Model [Volume 8, Issue 3, 2022, Pages 1043-1053]
  • Ahmed, Sahin Theoretical Investigation of Viscosity and Thermal Conductivity ‎of a Gas along a Non-isothermal Vertical Surface in Porous ‎Environment with Dissipative Heat: Numerical Technique [Volume 8, Issue 4, 2022, Pages 1236-1245]
  • Akbas, Seref Doguscan Application of Newmark Average Acceleration and Ritz Methods ‎on Dynamical Analysis of Composite Beams under a Moving Load [Volume 8, Issue 2, 2022, Pages 764-773]
  • Akgöz, Bekir Application of Newmark Average Acceleration and Ritz Methods ‎on Dynamical Analysis of Composite Beams under a Moving Load [Volume 8, Issue 2, 2022, Pages 764-773]
  • Akinshilo, Akinbowale T. Thermal Analysis of Radiating Film Flow of Sodium Alginate ‎using MWCNT Nanoparticles ‎ [Volume 8, Issue 1, 2022, Pages 219-231]
  • Alaofi, Z.M. Numerical Investigations of the Coupled Nonlinear Non-homogeneous Partial Differential Equations [Volume 8, Issue 3, 2022, Pages 1054-1064]
  • Aleksandrov, Alexander Yu. Stability Analysis of Gyroscopic Systems with Delay under ‎Synchronous and Asynchronous Switching [Volume 8, Issue 3, 2022, Pages 1113-1119]
  • Aliasghary, Mortaza Pull-in Phenomenon in the Electrostatically Micro-switch ‎Suspended between Two Conductive Plates using the Artificial ‎Neural Network [Volume 8, Issue 4, 2022, Pages 1222-1235]
  • Aliev, Fikret A. Algorithm for Determining the Permeability and Compaction ‎Properties of a Gas Condensate Reservoir based on a Binary Model [Volume 8, Issue 3, 2022, Pages 1014-1022]
  • Alizadeh, Ali A Modified Couple Stress-Based Model for the Nonlinear ‎Vibrational Analysis of Nano-Disks Using Multiple Scales Method [Volume 8, Issue 2, 2022, Pages 580-596]
  • Allahverdi, Jafarov Algorithm for Determining the Permeability and Compaction ‎Properties of a Gas Condensate Reservoir based on a Binary Model [Volume 8, Issue 3, 2022, Pages 1014-1022]
  • Almeida, Raquel Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading [Volume 8, Issue 1, 2022, Pages 388-404]
  • Al-Zahrani, Meshal A. Free Vibration Analysis of 2D Functionally Graded Strip Beam using Finite ‎Element Method‎ [Volume 8, Issue 4, 2022, Pages 1422-1430]
  • Amanulla, CH. Magneto Casson-Carreau Fluid Flow through a Circular Porous ‎Cylinder with Partial Slip‎ [Volume 8, Issue 4, 2022, Pages 1208-1221]
  • Amaral, Rodrigo Reis Proportional Topology Optimization under ‎Reliability-based Constraints [Volume 8, Issue 1, 2022, Pages 319-330]
  • Ameur, Houari Hydrodynamic Behavior in Solar Oil Heat Exchanger Ducts Fitted ‎with Staggered Baffles and Fins [Volume 8, Issue 3, 2022, Pages 774-790]
  • Amini, Yasser Thermal Performance of Oscillating Blade with Various ‎Geometries in a Straight Channel [Volume 8, Issue 1, 2022, Pages 114-128]
  • Amiri, Saeed Reduction in Space for Dynamic Finite Element Analysis of Assemblies of Beam-columns when the Mass is Available in Digitized Format [Volume 8, Issue 1, 2022, Pages 71-83]
  • Anjum, Naveed A Brief Review on the Asymptotic Methods for the Periodic ‎Behaviour of Microelectromechanical Systems [Volume 8, Issue 3, 2022, Pages 1120-1140]
  • Anwar Bég, Osman Non-similar Radiative Bioconvection Nanofluid Flow under ‎Oblique Magnetic Field with Entropy Generation‎ [Volume 8, Issue 1, 2022, Pages 206-218]
  • Arefi, Mohammad Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]
  • Ashiq, Alina A Brief Review on the Asymptotic Methods for the Periodic ‎Behaviour of Microelectromechanical Systems [Volume 8, Issue 3, 2022, Pages 1120-1140]
  • Asiri, Saeed A. Free Vibration Analysis of 2D Functionally Graded Strip Beam using Finite ‎Element Method‎ [Volume 8, Issue 4, 2022, Pages 1422-1430]
  • Atta, Doaa Thermal Diffusion Responses in an Infinite Medium with a ‎Spherical Cavity using the Atangana-Baleanu Fractional ‎Operator [Volume 8, Issue 4, 2022, Pages 1358-1369]
  • Avazzadeh, Zakieh Haar Wavelet Method for Solving High-Order Differential Equations with Multi-Point Boundary Conditions [Volume 8, Issue 2, 2022, Pages 528-544]
  • Azadi, Shahram A Comparative Study on the Efficiency of Compiled Languages ‎and MATLAB/Simulink for Simulation of Highly Nonlinear ‎Automotive Systems [Volume 8, Issue 3, 2022, Pages 853-864]
  • Azargoman, Majid A Hybrid SVM-RVM Algorithm to Mechanical Properties in the Friction Stir Welding Process [Volume 8, Issue 1, 2022, Pages 36-47]

B

  • Bachiri, Attia On the Thermo-elastic Response of FG-CNTRC Cross-ply ‎Laminated Plates under Temperature Loading using a New HSDT‎ [Volume 8, Issue 4, 2022, Pages 1370-1386]
  • Balandin, Vladimir Vl. Experimental Study and Identification of a Dynamic ‎Deformation Model of Dry Clay at Strain Rates up to 2500 s-1‎ [Volume 8, Issue 3, 2022, Pages 981-995]
  • Balandin, Vladimir Vas. Experimental Study and Identification of a Dynamic ‎Deformation Model of Dry Clay at Strain Rates up to 2500 s-1‎ [Volume 8, Issue 3, 2022, Pages 981-995]
  • Barman, Tapas Magnetized Bi-convective Nanofluid Flow and Entropy ‎Production Using Temperature-sensitive Base Fluid Properties:‎ A Unique Approach [Volume 8, Issue 4, 2022, Pages 1163-1175]
  • Basalin, Artem The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
  • Basha, H.T. Stability Analysis of Casson Nanofluid Flow over an Extending/Contracting ‎Wedge and Stagnation Point [Volume 8, Issue 2, 2022, Pages 566-579]
  • Becker, Wilfried Two-dimensional Stress and strain Analysis for Graphene-‎polymer Nanocomposite under Axial Load [Volume 8, Issue 3, 2022, Pages 1065-1075]
  • Behdinan, Kamran Neural Networks with Input Dimensionality Reduction for ‎Efficient Temperature Distribution Prediction in a Warm ‎Stamping Process [Volume 8, Issue 4, 2022, Pages 1431-1444]
  • Belov, Alexandr A. Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]
  • Belov, Alexandr Dynamic Response of a Step Loaded Cubic Cavity Embedded in a ‎Partially Saturated Poroelastic Half-space by the Boundary ‎Element Method [Volume 8, Issue 1, 2022, Pages 331-339]
  • Belov, Alexandr The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
  • Benzenine, Hamidou Impact of the Narrowing System at Different Locations and ‎Heights on the Performance of a Plane Solar Collector [Volume 8, Issue 4, 2022, Pages 1445-1455]
  • Bhaskara Reddy, K.U. Topology Optimization of Laminated Composite Plates and Shells using Optimality Criteria [Volume 8, Issue 2, 2022, Pages 405-415]
  • Bhikshma, V. Topology Optimization of Laminated Composite Plates and Shells using Optimality Criteria [Volume 8, Issue 2, 2022, Pages 405-415]
  • Bhowmick, Shubhankar Transient Response of Longitudinal Fins under Step Changes in ‎Base Temperature and Heat Flux using Lattice Boltzmann ‎Method [Volume 8, Issue 3, 2022, Pages 925-939]
  • Binti Jaafar, Nurul Aini Theoretical Study on Poiseuille Flow of Herschel-Bulkley Fluid in ‎Porous Media‎ [Volume 8, Issue 4, 2022, Pages 1246-1269]
  • Biscaia, Hugo Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading [Volume 8, Issue 1, 2022, Pages 388-404]
  • Biserni, Cesare Prediction Capabilities of a One-dimensional Wall-flow ‎Particulate Filter Model [Volume 8, Issue 1, 2022, Pages 245-259]
  • Biswal, Uddhaba Investigation of Jeffery-Hamel Flow for Nanofluid in the Presence of Magnetic Field by a New Approach in the Optimal Homotopy Analysis Method [Volume 8, Issue 1, 2022, Pages 48-59]
  • Borges, Julian Alves Proportional Topology Optimization under ‎Reliability-based Constraints [Volume 8, Issue 1, 2022, Pages 319-330]
  • Boudebous, Saadoun Mixed Convection Heat Transfer and Entropy Generation in a ‎Water-filled Square Cavity Partially Heated from Below: The ‎Effects of Richardson and Prandtl Numbers [Volume 8, Issue 1, 2022, Pages 282-297]
  • Boulahia, Z. Magneto Casson-Carreau Fluid Flow through a Circular Porous ‎Cylinder with Partial Slip‎ [Volume 8, Issue 4, 2022, Pages 1208-1221]
  • Bragov, Anatoliy The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
  • Bragov, Anatoliy M. Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]
  • Bragov, Anatoly Experimental Study and Identification of a Dynamic ‎Deformation Model of Dry Clay at Strain Rates up to 2500 s-1‎ [Volume 8, Issue 3, 2022, Pages 981-995]
  • Brito, Alejandro Refined Cross-sample Entropy based on Freedman-Diaconis Rule: ‎Application to Foreign Exchange Time Series [Volume 8, Issue 3, 2022, Pages 1005-1013]
  • Bustamante, R. Finite Deformations of Fibre-reinforced Elastic Solids with ‎Fibre Bending Stiffness: A Spectral Approach [Volume 8, Issue 4, 2022, Pages 1332-1342]

C

  • Cardenas, Diego Generation of a Quadrilateral Mesh based on NURBS for Gyroids ‎of Variable Thickness and Porosity [Volume 8, Issue 2, 2022, Pages 684-698]
  • Casagrande, Daniele Direct Transcription Approach to Dynamic Optimization Problems in Engineering [Volume 8, Issue 2, 2022, Pages 605-616]
  • Chaimahawan, Preeda Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
  • Chakraverty, Snehashish Investigation of Jeffery-Hamel Flow for Nanofluid in the Presence of Magnetic Field by a New Approach in the Optimal Homotopy Analysis Method [Volume 8, Issue 1, 2022, Pages 48-59]
  • Chamkha, Ali J. Heating Capacity of an Earth to Air Heat Exchanger in Arid Regions - Experimental Investigation [Volume 8, Issue 2, 2022, Pages 429-437]
  • Chamkha, Ali J. Hydrodynamic Behavior in Solar Oil Heat Exchanger Ducts Fitted ‎with Staggered Baffles and Fins [Volume 8, Issue 3, 2022, Pages 774-790]
  • Chamkha, Ali J. Magnetized Bi-convective Nanofluid Flow and Entropy ‎Production Using Temperature-sensitive Base Fluid Properties:‎ A Unique Approach [Volume 8, Issue 4, 2022, Pages 1163-1175]
  • Chamkha, Ali. J Numerical Simulation of Unsteady Flow toward a Stretching/Shrinking Sheet in Porous Medium Filled with a Hybrid Nanofluid [Volume 8, Issue 1, 2022, Pages 11-20]
  • Chamkha, Ali. J. Theoretical Study of Convective Heat Transfer in Ternary ‎Nanofluid Flowing past a Stretching Sheet [Volume 8, Issue 4, 2022, Pages 1279-1286]
  • Chandrasekhar, K.N.V. Topology Optimization of Laminated Composite Plates and Shells using Optimality Criteria [Volume 8, Issue 2, 2022, Pages 405-415]
  • Chaudhary, Soniya Scattering and Backscattering Study of Mechanical Plane Wave in Composite Materials Plates (Earth model 1066B and LiNbO3) [Volume 8, Issue 2, 2022, Pages 518-527]
  • Chaurasia, Anju Numerical Scheme based on Non-polynomial Spline Functions for ‎the System of Second Order Boundary Value Problems arising in ‎Various Engineering Applications [Volume 8, Issue 1, 2022, Pages 144-152]
  • Chen, Chun-Sheng Dynamic Response of Functionally Graded Carbon ‎Nanotube-Reinforced Hybrid Composite Plates [Volume 8, Issue 1, 2022, Pages 182-195]
  • Chen, Wei-Ren Dynamic Response of Functionally Graded Carbon ‎Nanotube-Reinforced Hybrid Composite Plates [Volume 8, Issue 1, 2022, Pages 182-195]
  • Chirkov, Artyom O. Influence of Up-down-up Constitutive Equation Parameters on ‎Yield Plateau Stage of Mild Steel Samples Subjected to Stretching [Volume 8, Issue 4, 2022, Pages 1315-1323]
  • Civalek, Ömer Application of Newmark Average Acceleration and Ritz Methods ‎on Dynamical Analysis of Composite Beams under a Moving Load [Volume 8, Issue 2, 2022, Pages 764-773]
  • Contreras-Reyes, Javier E. Refined Cross-sample Entropy based on Freedman-Diaconis Rule: ‎Application to Foreign Exchange Time Series [Volume 8, Issue 3, 2022, Pages 1005-1013]
  • Cuadrado Sempere, Óscar Mechanical Characterisation and Comparison of Hyperelastic ‎Adhesives: Modelling and Experimental Validation [Volume 8, Issue 1, 2022, Pages 359-369]

D

  • Daikh, Ahmed Amine On the Thermo-elastic Response of FG-CNTRC Cross-ply ‎Laminated Plates under Temperature Loading using a New HSDT‎ [Volume 8, Issue 4, 2022, Pages 1370-1386]
  • Damrongwiriyanupap, Nattapong Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
  • Das, Raj Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]
  • Dash, A.K. Free Convection of Micropolar Fluid over an Infinite Inclined ‎Moving Porous Plate [Volume 8, Issue 4, 2022, Pages 1154-1162]
  • Davodi, Amin Thermal Analysis of Radiating Film Flow of Sodium Alginate ‎using MWCNT Nanoparticles ‎ [Volume 8, Issue 1, 2022, Pages 219-231]
  • De Felice, Alessandro Multibody Efficiency Analysis of Chain Drives in Racing Motorcycles [Volume 8, Issue 3, 2022, Pages 1091-1102]
  • Dehghani, Reza Distributed-parameter Dynamic Modeling and Bifurcation Analysis of a Trapezoidal Piezomagnetoelastic Energy Harvester [Volume 8, Issue 1, 2022, Pages 97-113]
  • Delgado-Gutiérrez, Arturo Generation of a Quadrilateral Mesh based on NURBS for Gyroids ‎of Variable Thickness and Porosity [Volume 8, Issue 2, 2022, Pages 684-698]
  • De Rosa, Maria Anna Variational Derivation of Truncated Timoshenko-Ehrenfest Beam Theory [Volume 8, Issue 3, 2022, Pages 996-1004]
  • De Rossi, Lorenzo Multibody Efficiency Analysis of Chain Drives in Racing Motorcycles [Volume 8, Issue 3, 2022, Pages 1091-1102]
  • Dinarvand, Saeed Numerical Simulation of Unsteady Flow toward a Stretching/Shrinking Sheet in Porous Medium Filled with a Hybrid Nanofluid [Volume 8, Issue 1, 2022, Pages 11-20]
  • Dipasquale, Daniele A Stress Tensor-based Failure Criterion for Ordinary State-based ‎Peridynamic Models‎ [Volume 8, Issue 2, 2022, Pages 617-628]
  • Di Re, Paolo Computational Enhancement of a Mixed 3D Beam Finite Element with Warping and Damage [Volume 8, Issue 1, 2022, Pages 260-281]
  • Dong, Chensong Multi-objective Optimal Design of Carbon and Glass Reinforced ‎Hybrid Composites under Flexural Loading [Volume 8, Issue 4, 2022, Pages 1324-1331]
  • Dragomir, S.S. Numerical Investigations of the Coupled Nonlinear Non-homogeneous Partial Differential Equations [Volume 8, Issue 3, 2022, Pages 1054-1064]
  • Dragunov, Valery P. Impact-enhanced Electrostatic Vibration Energy Harvester [Volume 8, Issue 2, 2022, Pages 671-683]
  • Dragunova, Evgeniya V. Impact-enhanced Electrostatic Vibration Energy Harvester [Volume 8, Issue 2, 2022, Pages 671-683]

E

  • Ebrahimi, Mahmoud Twin Screw Expanders Profile Optimization Using Surrogate-‎Based Modelling [Volume 8, Issue 4, 2022, Pages 1141-1153]
  • Edalatifar, Mohammad A Deep Learning Approach to Predict the Flow Field and Thermal ‎Patterns of Nonencapsulated Phase Change Materials ‎Suspensions in an Enclosure‎ [Volume 8, Issue 4, 2022, Pages 1270-1278]
  • El-Danaf, T.A. Numerical Investigations of the Coupled Nonlinear Non-homogeneous Partial Differential Equations [Volume 8, Issue 3, 2022, Pages 1054-1064]
  • Elishakoff, Isaac Variational Derivation of Truncated Timoshenko-Ehrenfest Beam Theory [Volume 8, Issue 3, 2022, Pages 996-1004]
  • Eltaher, Mohamed A. Free Vibration Analysis of 2D Functionally Graded Strip Beam using Finite ‎Element Method‎ [Volume 8, Issue 4, 2022, Pages 1422-1430]
  • Emam, Sayyed Mohammad Evaluating the Delamination in the Drilling Process of a Melamine Coated Medium Density Fiberboard (MDF) [Volume 8, Issue 1, 2022, Pages 1-10]
  • Emamzadeh, Mohamamd A Closed-Form Solution for Electro-Osmotic Flow in Nano-Channels [Volume 8, Issue 2, 2022, Pages 510-517]
  • Eremeev, Victor The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
  • Eremeyev, Victor Dynamic Response of a Step Loaded Cubic Cavity Embedded in a ‎Partially Saturated Poroelastic Half-space by the Boundary ‎Element Method [Volume 8, Issue 1, 2022, Pages 331-339]
  • Eremeyev, Victor Experimental Study and Identification of a Dynamic ‎Deformation Model of Dry Clay at Strain Rates up to 2500 s-1‎ [Volume 8, Issue 3, 2022, Pages 981-995]
  • Eremeyev, Victor A. Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]
  • Eremin, Mikhail O. Influence of Up-down-up Constitutive Equation Parameters on ‎Yield Plateau Stage of Mild Steel Samples Subjected to Stretching [Volume 8, Issue 4, 2022, Pages 1315-1323]
  • Ershkov, Sergey Rotations of a Rigid Body Close to the Lagrange Case under the ‎Action of Nonstationary Perturbation Torque [Volume 8, Issue 3, 2022, Pages 1023-1031]
  • Esakki, Balasubramanian Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
  • Ezzin, Hamdi Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]

F

  • Farbod, Mansoor A New Modified Hamilton-Crosser and Nan Models for Thermal ‎Conductivity of Different Lengths Carbon Nanotubes Water-‎based Nanofluids [Volume 8, Issue 3, 2022, Pages 831-837]
  • Farhadi Nia, Mahmood Theoretical and Experimental Investigation on Mechanical Behavior of Aluminum to Aluminum Tubular Bonded Lap Joint under Pure Torsion and a Finite Element Comparison with Hybrid Rivet/Bonded Joint [Volume 8, Issue 2, 2022, Pages 485-492]
  • Farzin, Mahmoud Design, Analysis and Manufacturing of a Bone Cutting Ultrasonic Horn-Tool and Verification with Experimental Tests [Volume 8, Issue 2, 2022, Pages 438-447]
  • Fatouraee, Naser Characterization of the Nonlinear Biaxial Mechanical Behavior ‎of Human Ureter using Constitutive Modeling and Artificial ‎Neural Networks [Volume 8, Issue 4, 2022, Pages 1186-1195]
  • Ferroudj, Nawal Mixed Convection Heat Transfer and Entropy Generation in a ‎Water-filled Square Cavity Partially Heated from Below: The ‎Effects of Richardson and Prandtl Numbers [Volume 8, Issue 1, 2022, Pages 282-297]
  • Fischer, Szabolcs Modeling of the Dynamic Rail Deflection using Elastic Wave Propagation [Volume 8, Issue 1, 2022, Pages 379-387]
  • Flores-Jimenez, Mariana S. Generation of a Quadrilateral Mesh based on NURBS for Gyroids ‎of Variable Thickness and Porosity [Volume 8, Issue 2, 2022, Pages 684-698]
  • Fuentes-Aguilar, Rita Q. Generation of a Quadrilateral Mesh based on NURBS for Gyroids ‎of Variable Thickness and Porosity [Volume 8, Issue 2, 2022, Pages 684-698]
  • Fung, Chin-Ping Dynamic Response of Functionally Graded Carbon ‎Nanotube-Reinforced Hybrid Composite Plates [Volume 8, Issue 1, 2022, Pages 182-195]

G

  • Ganga, B. Heat Transfer of Hybrid-nanofluids Flow Past a Permeable Flat Surface with Different Volume Fractions [Volume 8, Issue 1, 2022, Pages 21-35]
  • Gao, Wan-Yang Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading [Volume 8, Issue 1, 2022, Pages 388-404]
  • Gao, Yonggang A Simplified Analytical Method for Detuning Periodic Pile Barriers [Volume 8, Issue 4, 2022, Pages 1480-1487]
  • Gayatri, Mocherla Nonlinear Convective Flow of Maxwell Fluid over a Slendering Stretching Sheet with Heat Source/Sink [Volume 8, Issue 1, 2022, Pages 60-70]
  • Ghahremani, Saeed Evaluating the Delamination in the Drilling Process of a Melamine Coated Medium Density Fiberboard (MDF) [Volume 8, Issue 1, 2022, Pages 1-10]
  • Gharagozloo, Mohammad Hossein Chaos Control in Gear Transmission System using GPC and SMC ‎Controllers [Volume 8, Issue 2, 2022, Pages 545-556]
  • Gholami Motlagh, Vahid Optimization of Air Distribution Patterns by Arrangements of ‎Air Inlets and Outlets: Case Study of an Operating Room [Volume 8, Issue 3, 2022, Pages 809-830]
  • Gireesha, B.J. Theoretical Study of Convective Heat Transfer in Ternary ‎Nanofluid Flowing past a Stretching Sheet [Volume 8, Issue 4, 2022, Pages 1279-1286]
  • Gómez-Aguilar, J.F. Numerical Solution of the Time Fractional Reaction-advection-diffusion Equation in Porous Media [Volume 8, Issue 1, 2022, Pages 84-96]
  • Gokul Raj, P. Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
  • Gomes, Herbert Martins Proportional Topology Optimization under ‎Reliability-based Constraints [Volume 8, Issue 1, 2022, Pages 319-330]
  • Gong, Xianglin An Analysis of Nonlinear Beam Vibrations with the Extended ‎Rayleigh-Ritz Method [Volume 8, Issue 4, 2022, Pages 1299-1306]
  • Govind Neelan, Arun Higher-Order Slope Limiters for Euler Equation [Volume 8, Issue 3, 2022, Pages 904-917]
  • Grigoryev, Mikhail Dynamic Response of a Step Loaded Cubic Cavity Embedded in a ‎Partially Saturated Poroelastic Half-space by the Boundary ‎Element Method [Volume 8, Issue 1, 2022, Pages 331-339]
  • Groşan, Teodor Comments on the paper “Nonlinear Convective Flow of Maxwell ‎Fluid over a Slendering Stretching Sheet with Heat Source/Sink, ‎Mocherla Gayatri, Konda Jayaramireddy, Macherla Jayachandra ‎Babu, J. Appl. Comput. Mech., 8(1), 2022, 60-70”‎ [Volume 8, Issue 3, 2022, Pages 1032-1034]
  • Guida, Domenico On the Analytical and Computational Methodologies for Modelling Two-wheeled Vehicles within the Multibody Dynamics Framework: A Systematic Literature Review [Volume 8, Issue 1, 2022, Pages 153-181]
  • Gupta, Yogesh Numerical Scheme based on Non-polynomial Spline Functions for ‎the System of Second Order Boundary Value Problems arising in ‎Various Engineering Applications [Volume 8, Issue 1, 2022, Pages 144-152]
  • Guzei, Dmitriy V. Flow Regimes Characteristics of Water-crude Oil in a Rectangular ‎Y-microchannel [Volume 8, Issue 2, 2022, Pages 655-670]
  • Guzei, D.V. Numerical Investigation of Enhanced Oil Recovery from various ‎Rocks by Nanosuspensions Flooding [Volume 8, Issue 1, 2022, Pages 306-318]

H

  • Hajiyeva, Nazile Algorithm for Determining the Permeability and Compaction ‎Properties of a Gas Condensate Reservoir based on a Binary Model [Volume 8, Issue 3, 2022, Pages 1014-1022]
  • Hassanzadeh, Mahdi Multi-objective Optimization of Shot-peening Parameters using ‎Design of Experiments and Finite Element Simulation: A ‎Statistical Model [Volume 8, Issue 3, 2022, Pages 838-852]
  • Hazarika, Silpi Theoretical Investigation of Viscosity and Thermal Conductivity ‎of a Gas along a Non-isothermal Vertical Surface in Porous ‎Environment with Dissipative Heat: Numerical Technique [Volume 8, Issue 4, 2022, Pages 1236-1245]
  • He, Chun-Hui A Brief Review on the Asymptotic Methods for the Periodic ‎Behaviour of Microelectromechanical Systems [Volume 8, Issue 3, 2022, Pages 1120-1140]
  • He, Ji-Huan A Brief Review on the Asymptotic Methods for the Periodic ‎Behaviour of Microelectromechanical Systems [Volume 8, Issue 3, 2022, Pages 1120-1140]
  • Heidari, Hamidreza Nonlinear Primary Frequency Response Analysis of Self-‎Sustaining Nanobeam Considering Surface Elasticity [Volume 8, Issue 4, 2022, Pages 1196-1207]
  • Hekmat, Mohamad Hamed Thermal Performance of Oscillating Blade with Various ‎Geometries in a Straight Channel [Volume 8, Issue 1, 2022, Pages 114-128]
  • Hepijid, Thanathorn A Study of Curved Louver Fin Configuration for ‎Heat Transfer Enhancement [Volume 8, Issue 2, 2022, Pages 754-763]
  • Heydari, Mohammad Haar Wavelet Method for Solving High-Order Differential Equations with Multi-Point Boundary Conditions [Volume 8, Issue 2, 2022, Pages 528-544]
  • Hojaji, Mohammad An Experimental Comparison between Wing Root and Wingtip ‎Corrugation Patterns of Dragonfly Wing at Ultra-low Reynolds ‎Number and High Angles of Attack‎ [Volume 8, Issue 4, 2022, Pages 1176-1185]
  • Hosseinzadeh, Narges Haar Wavelet Method for Solving High-Order Differential Equations with Multi-Point Boundary Conditions [Volume 8, Issue 2, 2022, Pages 528-544]
  • Hou, Chun Kit Jeffery Neural Networks with Input Dimensionality Reduction for ‎Efficient Temperature Distribution Prediction in a Warm ‎Stamping Process [Volume 8, Issue 4, 2022, Pages 1431-1444]
  • Huang, Bin An Analysis of Nonlinear Beam Vibrations with the Extended ‎Rayleigh-Ritz Method [Volume 8, Issue 4, 2022, Pages 1299-1306]

I

  • Igumnov, Leonid A. Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]
  • Igumnov, Leonid Dynamic Response of a Step Loaded Cubic Cavity Embedded in a ‎Partially Saturated Poroelastic Half-space by the Boundary ‎Element Method [Volume 8, Issue 1, 2022, Pages 331-339]
  • Igumnov, Leonid The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
  • Igumnov, Leonid Experimental Study and Identification of a Dynamic ‎Deformation Model of Dry Clay at Strain Rates up to 2500 s-1‎ [Volume 8, Issue 3, 2022, Pages 981-995]
  • Ilegbusi, Adeleke Thermal Analysis of Radiating Film Flow of Sodium Alginate ‎using MWCNT Nanoparticles ‎ [Volume 8, Issue 1, 2022, Pages 219-231]
  • Imeni Markhali, Milad Characterization of the Nonlinear Biaxial Mechanical Behavior ‎of Human Ureter using Constitutive Modeling and Artificial ‎Neural Networks [Volume 8, Issue 4, 2022, Pages 1186-1195]
  • Imjai, Thanongsak Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
  • Impiombato, Andrea Natale Prediction Capabilities of a One-dimensional Wall-flow ‎Particulate Filter Model [Volume 8, Issue 1, 2022, Pages 245-259]
  • Indumathi, N. Heat Transfer of Hybrid-nanofluids Flow Past a Permeable Flat Surface with Different Volume Fractions [Volume 8, Issue 1, 2022, Pages 21-35]
  • Isametov, Aysen Computational and Experimental Study of the Composite ‎Material for the Centrifugal Pump Impellers Manufacturing [Volume 8, Issue 4, 2022, Pages 1407-1421]
  • Isametova, Madina Computational and Experimental Study of the Composite ‎Material for the Centrifugal Pump Impellers Manufacturing [Volume 8, Issue 4, 2022, Pages 1407-1421]
  • Ishak, Anuar Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
  • Iuzhina, Tatiana N. Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]
  • Ivanova, Jordanka Two-dimensional Stress and strain Analysis for Graphene-‎polymer Nanocomposite under Axial Load [Volume 8, Issue 3, 2022, Pages 1065-1075]
  • Ivanova, S.V. Numerical Investigation of Enhanced Oil Recovery from various ‎Rocks by Nanosuspensions Flooding [Volume 8, Issue 1, 2022, Pages 306-318]
  • Izadpanah, Ehsan Thermal Performance of Oscillating Blade with Various ‎Geometries in a Straight Channel [Volume 8, Issue 1, 2022, Pages 114-128]

J

  • Jafari, Sanaz Elastic Limit Angular Velocity and Acceleration Investigation in Non-‎Uniform Rotating Disk under Time-Dependent Mechanical Loading [Volume 8, Issue 3, 2022, Pages 791-808]
  • Jamalbayli, Tayfun Algorithm for Determining the Permeability and Compaction ‎Properties of a Gas Condensate Reservoir based on a Binary Model [Volume 8, Issue 3, 2022, Pages 1014-1022]
  • Jamalbayov, Mahammad Algorithm for Determining the Permeability and Compaction ‎Properties of a Gas Condensate Reservoir based on a Binary Model [Volume 8, Issue 3, 2022, Pages 1014-1022]
  • Jayachandra Babu, Macherla Nonlinear Convective Flow of Maxwell Fluid over a Slendering Stretching Sheet with Heat Source/Sink [Volume 8, Issue 1, 2022, Pages 60-70]
  • Jayaprakash, R. Heat Transfer of Hybrid-nanofluids Flow Past a Permeable Flat Surface with Different Volume Fractions [Volume 8, Issue 1, 2022, Pages 21-35]
  • Jayaramireddy, Konda Nonlinear Convective Flow of Maxwell Fluid over a Slendering Stretching Sheet with Heat Source/Sink [Volume 8, Issue 1, 2022, Pages 60-70]
  • Jing, Huimin An Analysis of Nonlinear Beam Vibrations with the Extended ‎Rayleigh-Ritz Method [Volume 8, Issue 4, 2022, Pages 1299-1306]

K

  • Karaivanov, Dimitar Computational and Experimental Study of the Composite ‎Material for the Centrifugal Pump Impellers Manufacturing [Volume 8, Issue 4, 2022, Pages 1407-1421]
  • Kazemi, Reza A Comparative Study on the Efficiency of Compiled Languages ‎and MATLAB/Simulink for Simulation of Highly Nonlinear ‎Automotive Systems [Volume 8, Issue 3, 2022, Pages 853-864]
  • Khajehdehi Kavanroodi, Mehdi Buckling and Vibration Analysis of a Double-layer Graphene ‎Sheet Coupled with a Piezoelectric Nanoplate [Volume 8, Issue 1, 2022, Pages 129-143]
  • Khan, Saeed Ullah A Kinetic Flux-vector Splitting Scheme for Two-layer Shallow Flow Model [Volume 8, Issue 3, 2022, Pages 1043-1053]
  • Khashi’ie, Najiyah Safwa Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
  • Khoroshilov, Valeriy Analysis of Possibilities to Use Predictive Mathematical Models ‎for Studying the Dam Deformation State [Volume 8, Issue 2, 2022, Pages 733-744]
  • Khurana, Ekanshu Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
  • Khute, Sahadasan Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
  • Kirilova, Elisaveta Two-dimensional Stress and strain Analysis for Graphene-‎polymer Nanocomposite under Axial Load [Volume 8, Issue 3, 2022, Pages 1065-1075]
  • Kiselev, Dmitry E. Impact-enhanced Electrostatic Vibration Energy Harvester [Volume 8, Issue 2, 2022, Pages 671-683]
  • Kittichaikarn, Chawalit A Study of Curved Louver Fin Configuration for ‎Heat Transfer Enhancement [Volume 8, Issue 2, 2022, Pages 754-763]
  • Kobeleva, Natalia Analysis of Possibilities to Use Predictive Mathematical Models ‎for Studying the Dam Deformation State [Volume 8, Issue 2, 2022, Pages 733-744]
  • Konstantinov, Aleksandr The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
  • Kou, Lei Studying the Strengthening Effect of Railway Ballast in the ‎Direct Shear Test due to Insertion of Middle-size Ballast Particles [Volume 8, Issue 4, 2022, Pages 1387-1397]
  • KÖTEN, Hasan Mixed Convection Heat Transfer and Entropy Generation in a ‎Water-filled Square Cavity Partially Heated from Below: The ‎Effects of Richardson and Prandtl Numbers [Volume 8, Issue 1, 2022, Pages 282-297]
  • Kozachenko, Tetiana Rotations of a Rigid Body Close to the Lagrange Case under the ‎Action of Nonstationary Perturbation Torque [Volume 8, Issue 3, 2022, Pages 1023-1031]
  • Kudenatti, Ramesh B. Numerical Study of Three-dimensional Boundary-layer Flow over ‎a Wedge: Magnetic Field Analysis [Volume 8, Issue 3, 2022, Pages 876-890]
  • Kuharat, Sireetorn Non-similar Radiative Bioconvection Nanofluid Flow under ‎Oblique Magnetic Field with Entropy Generation‎ [Volume 8, Issue 1, 2022, Pages 206-218]
  • Kumar, A. Vanav Theoretical Study on Poiseuille Flow of Herschel-Bulkley Fluid in ‎Porous Media‎ [Volume 8, Issue 4, 2022, Pages 1246-1269]
  • Kumar, Sachin Numerical Solution of the Time Fractional Reaction-advection-diffusion Equation in Porous Media [Volume 8, Issue 1, 2022, Pages 84-96]
  • Kuprikov, Mikhail Yu. Moment-Inertial Factor as a Criterion for Assessing the ‎Dimension of an Aircraft [Volume 8, Issue 4, 2022, Pages 1307-1314]
  • Kuprikov, Nikita M. Moment-Inertial Factor as a Criterion for Assessing the ‎Dimension of an Aircraft [Volume 8, Issue 4, 2022, Pages 1307-1314]
  • Kurhan, Dmytro Modeling of the Dynamic Rail Deflection using Elastic Wave Propagation [Volume 8, Issue 1, 2022, Pages 379-387]

L

  • Lakhi, Mohammad Evaluating the Delamination in the Drilling Process of a Melamine Coated Medium Density Fiberboard (MDF) [Volume 8, Issue 1, 2022, Pages 1-10]
  • Lavimi, Roham An Experimental Comparison between Wing Root and Wingtip ‎Corrugation Patterns of Dragonfly Wing at Ultra-low Reynolds ‎Number and High Angles of Attack‎ [Volume 8, Issue 4, 2022, Pages 1176-1185]
  • Lee, Jer Vui Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]
  • Leshchenko, Dmytro Rotations of a Rigid Body Close to the Lagrange Case under the ‎Action of Nonstationary Perturbation Torque [Volume 8, Issue 3, 2022, Pages 1023-1031]
  • Limkatanyu, Suchart Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
  • Lippiello, Maria Variational Derivation of Truncated Timoshenko-Ehrenfest Beam Theory [Volume 8, Issue 3, 2022, Pages 996-1004]
  • Liu, Jianxing Studying the Strengthening Effect of Railway Ballast in the ‎Direct Shear Test due to Insertion of Middle-size Ballast Particles [Volume 8, Issue 4, 2022, Pages 1387-1397]
  • Liu, Zhiye Studying the Strengthening Effect of Railway Ballast in the ‎Direct Shear Test due to Insertion of Middle-size Ballast Particles [Volume 8, Issue 4, 2022, Pages 1387-1397]
  • Lomunov, Andrey K. Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]

M

  • Madhavi, Santhosh Polymeric Dissipative Convection Flow from an Inclined Plane with Chemical Reaction: Numerical Study [Volume 8, Issue 2, 2022, Pages 416-428]
  • Magodora, Mangwiro Effect of Cattaneo-Christov Heat Flux on Radiative ‎Hydromagnetic Nanofluid Flow between Parallel Plates using ‎Spectral Quasilinearization Method [Volume 8, Issue 3, 2022, Pages 865-875]
  • Mahmoodi, Masoud A Hybrid SVM-RVM Algorithm to Mechanical Properties in the Friction Stir Welding Process [Volume 8, Issue 1, 2022, Pages 36-47]
  • Malek-Mohammadi, Hosein Buckling and Vibration Analysis of a Double-layer Graphene ‎Sheet Coupled with a Piezoelectric Nanoplate [Volume 8, Issue 1, 2022, Pages 129-143]
  • Malekzadeh Fard, Keramat Buckling and Vibration Analysis of a Double-layer Graphene ‎Sheet Coupled with a Piezoelectric Nanoplate [Volume 8, Issue 1, 2022, Pages 129-143]
  • Manjunatha, S. Theoretical Study of Convective Heat Transfer in Ternary ‎Nanofluid Flowing past a Stretching Sheet [Volume 8, Issue 4, 2022, Pages 1279-1286]
  • Manrique-Escobar, Camilo Andrés On the Analytical and Computational Methodologies for Modelling Two-wheeled Vehicles within the Multibody Dynamics Framework: A Systematic Literature Review [Volume 8, Issue 1, 2022, Pages 153-181]
  • Maraki, Mohammad Reza A Hybrid SVM-RVM Algorithm to Mechanical Properties in the Friction Stir Welding Process [Volume 8, Issue 1, 2022, Pages 36-47]
  • Marques, Eduardo A.S. Mechanical Characterisation and Comparison of Hyperelastic ‎Adhesives: Modelling and Experimental Validation [Volume 8, Issue 1, 2022, Pages 359-369]
  • Mehdizadeh Khalsaraei, Mohammad Nonstandard Dynamically Consistent Numerical Methods for ‎MSEIR Model [Volume 8, Issue 1, 2022, Pages 196-205]
  • Menni, Younes Heating Capacity of an Earth to Air Heat Exchanger in Arid Regions - Experimental Investigation [Volume 8, Issue 2, 2022, Pages 429-437]
  • Menni, Younes Hydrodynamic Behavior in Solar Oil Heat Exchanger Ducts Fitted ‎with Staggered Baffles and Fins [Volume 8, Issue 3, 2022, Pages 774-790]
  • Merodio, J. Finite Deformations of Fibre-reinforced Elastic Solids with ‎Fibre Bending Stiffness: A Spectral Approach [Volume 8, Issue 4, 2022, Pages 1332-1342]
  • Micaelo, Rui Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading [Volume 8, Issue 1, 2022, Pages 388-404]
  • Mikhasev, Gennadi Pull-in Instability Analysis of a Nanocantilever Based on the ‎Two-Phase Nonlocal Theory of Elasticity [Volume 8, Issue 4, 2022, Pages 1456-1466]
  • Milani, Massimo Prediction Capabilities of a One-dimensional Wall-flow ‎Particulate Filter Model [Volume 8, Issue 1, 2022, Pages 245-259]
  • Minakov, Andrey V. Flow Regimes Characteristics of Water-crude Oil in a Rectangular ‎Y-microchannel [Volume 8, Issue 2, 2022, Pages 655-670]
  • Minakov, A.V. Numerical Investigation of Enhanced Oil Recovery from various ‎Rocks by Nanosuspensions Flooding [Volume 8, Issue 1, 2022, Pages 306-318]
  • Mirzabeigy, Alborz A Simple Approach for Dealing with Autonomous Conservative ‎Oscillator under Initial Velocity [Volume 8, Issue 3, 2022, Pages 918-924]
  • Mishra, S.R. Metal and Metallic Oxide Nanofluid over a Shrinking Surface with ‎Thermal Radiation and Heat Generation/Absorption [Volume 8, Issue 2, 2022, Pages 557-565]
  • Mishra, S.R. Free Convection of Micropolar Fluid over an Infinite Inclined ‎Moving Porous Plate [Volume 8, Issue 4, 2022, Pages 1154-1162]
  • Misnik, Vyacheslav Pull-in Instability Analysis of a Nanocantilever Based on the ‎Two-Phase Nonlocal Theory of Elasticity [Volume 8, Issue 4, 2022, Pages 1456-1466]
  • Mkaoir, Mohamed Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]
  • Mobki, Hamed Pull-in Phenomenon in the Electrostatically Micro-switch ‎Suspended between Two Conductive Plates using the Artificial ‎Neural Network [Volume 8, Issue 4, 2022, Pages 1222-1235]
  • Moghimi, Mahdi Twin Screw Expanders Profile Optimization Using Surrogate-‎Based Modelling [Volume 8, Issue 4, 2022, Pages 1141-1153]
  • Mohammad Khanlo, Heshmatallah Distributed-parameter Dynamic Modeling and Bifurcation Analysis of a Trapezoidal Piezomagnetoelastic Energy Harvester [Volume 8, Issue 1, 2022, Pages 97-113]
  • Mohd Kasim, Abdul Rahman Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
  • Molayi, Maryam Nonstandard Dynamically Consistent Numerical Methods for ‎MSEIR Model [Volume 8, Issue 1, 2022, Pages 196-205]
  • Momeni, Fereshte Analytical Solutions and Analyses of the Displacement ‎Separating Point in Diffusers [Volume 8, Issue 3, 2022, Pages 891-903]
  • Mondal, Hiranmoy Effect of Cattaneo-Christov Heat Flux on Radiative ‎Hydromagnetic Nanofluid Flow between Parallel Plates using ‎Spectral Quasilinearization Method [Volume 8, Issue 3, 2022, Pages 865-875]
  • Montorsi, Luca Prediction Capabilities of a One-dimensional Wall-flow ‎Particulate Filter Model [Volume 8, Issue 1, 2022, Pages 245-259]
  • Mosalmani, Reza Size Effect on the Axisymmetric Vibrational Response of ‎Functionally Graded Circular Nano-Plate Based on the Nonlocal Stress-Driven Method [Volume 8, Issue 3, 2022, Pages 962-980]
  • Moussavi Torshizi, Seyed Ebrahim Multi-objective Optimization of Shot-peening Parameters using ‎Design of Experiments and Finite Element Simulation: A ‎Statistical Model [Volume 8, Issue 3, 2022, Pages 838-852]
  • Munafo, C.F. Analysis of a Hyperbolic Heat Transfer Model in Blood-perfused ‎Biological Tissues with Laser Heating [Volume 8, Issue 4, 2022, Pages 1398-1406]
  • Myntiuk, Sofia Spectral Methods Application in Problems of the Thin-walled ‎Structures Deformation [Volume 8, Issue 2, 2022, Pages 641-654]
  • Myntiuk, Vitalii Spectral Methods Application in Problems of the Thin-walled ‎Structures Deformation [Volume 8, Issue 2, 2022, Pages 641-654]

N

  • Naderi, Mahmood Experimental and Finite Element Study to Determine the ‎Mechanical Properties and Bond Between Repair Mortars and ‎Concrete Substrates [Volume 8, Issue 2, 2022, Pages 493-509]
  • Nagar, Atulya K. Theoretical Study on Poiseuille Flow of Herschel-Bulkley Fluid in ‎Porous Media‎ [Volume 8, Issue 4, 2022, Pages 1246-1269]
  • Nagendra, N. Magneto Casson-Carreau Fluid Flow through a Circular Porous ‎Cylinder with Partial Slip‎ [Volume 8, Issue 4, 2022, Pages 1208-1221]
  • Nair, Manoj T. Higher-Order Slope Limiters for Euler Equation [Volume 8, Issue 3, 2022, Pages 904-917]
  • Nee, Alexander Comparative Study of Hybrid Lattice Boltzmann and Vorticity-‎vector Potential Modelling of 2D and 3D Natural Convection ‎Combined with Rosseland Radiation [Volume 8, Issue 4, 2022, Pages 1467-1479]
  • Niroomand, Mohammad Reza Design, Analysis and Manufacturing of a Bone Cutting Ultrasonic Horn-Tool and Verification with Experimental Tests [Volume 8, Issue 2, 2022, Pages 438-447]
  • Noormohammadi Arani, Omid Investigation on the Crack Effect in the Cylinder and Matrix on the Backscattering Field Frequency Specifications using the Finite Element Method [Volume 8, Issue 2, 2022, Pages 448-455]
  • Noskov, Mikhail Analysis of Possibilities to Use Predictive Mathematical Models ‎for Studying the Dam Deformation State [Volume 8, Issue 2, 2022, Pages 733-744]
  • Numanoglu, Hayri Metin Application of Newmark Average Acceleration and Ritz Methods ‎on Dynamical Analysis of Composite Beams under a Moving Load [Volume 8, Issue 2, 2022, Pages 764-773]
  • Nussipali, Rollan Computational and Experimental Study of the Composite ‎Material for the Centrifugal Pump Impellers Manufacturing [Volume 8, Issue 4, 2022, Pages 1407-1421]

O

  • Orozco Murillo, William Geometric Optimization of Jet Pump Used in Vacuum ‎Distillation Applications under Different Operating Conditions ‎using Genetic-algorithm Methods [Volume 8, Issue 1, 2022, Pages 340-358]
  • Ostertak, Dmitriy I. Impact-enhanced Electrostatic Vibration Energy Harvester [Volume 8, Issue 2, 2022, Pages 671-683]
  • OUAKAD, Hassen M. Pull-in Phenomenon in the Electrostatically Micro-switch ‎Suspended between Two Conductive Plates using the Artificial ‎Neural Network [Volume 8, Issue 4, 2022, Pages 1222-1235]

P

  • Pakhaliuk, Vladimir Ivanovich Reducing the Wear of the UHMWPE Used in the Total Hip ‎Replacement after Low-Pressure Plasma Treatment [Volume 8, Issue 3, 2022, Pages 1035-1042]
  • Palacio-Fernández, José A. Geometric Optimization of Jet Pump Used in Vacuum ‎Distillation Applications under Different Operating Conditions ‎using Genetic-algorithm Methods [Volume 8, Issue 1, 2022, Pages 340-358]
  • Pandey, Prashant Numerical Solution of the Time Fractional Reaction-advection-diffusion Equation in Porous Media [Volume 8, Issue 1, 2022, Pages 84-96]
  • Pappalardo, Carmine Maria On the Analytical and Computational Methodologies for Modelling Two-wheeled Vehicles within the Multibody Dynamics Framework: A Systematic Literature Review [Volume 8, Issue 1, 2022, Pages 153-181]
  • Park, Y.H. Development of an Educational Code of Deriving Equations of ‎Motion and Analyzing Dynamic Characteristics of Multibody ‎Closed Chain Systems using GNU Octave for a Beginner [Volume 8, Issue 1, 2022, Pages 232-244]
  • Pasdar, Amir Hossein A Comparative Study on the Efficiency of Compiled Languages ‎and MATLAB/Simulink for Simulation of Highly Nonlinear ‎Automotive Systems [Volume 8, Issue 3, 2022, Pages 853-864]
  • Patiño Arcila, Iván D. Geometric Optimization of Jet Pump Used in Vacuum ‎Distillation Applications under Different Operating Conditions ‎using Genetic-algorithm Methods [Volume 8, Issue 1, 2022, Pages 340-358]
  • Pavlovic, Ana Finite Elements Analysis of the Hyperelastic Impeller Rotating in ‎the Self-Priming Pump [Volume 8, Issue 3, 2022, Pages 1103-1112]
  • Petrov, Andrey Dynamic Response of a Step Loaded Cubic Cavity Embedded in a ‎Partially Saturated Poroelastic Half-space by the Boundary ‎Element Method [Volume 8, Issue 1, 2022, Pages 331-339]
  • Petrova, Tatyana Two-dimensional Stress and strain Analysis for Graphene-‎polymer Nanocomposite under Axial Load [Volume 8, Issue 3, 2022, Pages 1065-1075]
  • Poliakov, Aleksandr Mikhailovich Reducing the Wear of the UHMWPE Used in the Total Hip ‎Replacement after Low-Pressure Plasma Treatment [Volume 8, Issue 3, 2022, Pages 1035-1042]
  • Polyakov, Pavel O. Moment-Inertial Factor as a Criterion for Assessing the ‎Dimension of an Aircraft [Volume 8, Issue 4, 2022, Pages 1307-1314]
  • Pop, Ioan Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
  • Pop, Ioan Comments on the paper “Nonlinear Convective Flow of Maxwell ‎Fluid over a Slendering Stretching Sheet with Heat Source/Sink, ‎Mocherla Gayatri, Konda Jayaramireddy, Macherla Jayachandra ‎Babu, J. Appl. Comput. Mech., 8(1), 2022, 60-70”‎ [Volume 8, Issue 3, 2022, Pages 1032-1034]
  • Pourmoayed, Ali Buckling and Vibration Analysis of a Double-layer Graphene ‎Sheet Coupled with a Piezoelectric Nanoplate [Volume 8, Issue 1, 2022, Pages 129-143]
  • Prapamonthon, Prasert A Stress Tensor-based Failure Criterion for Ordinary State-based ‎Peridynamic Models‎ [Volume 8, Issue 2, 2022, Pages 617-628]
  • Pryazhnikov, Andrey I. Flow Regimes Characteristics of Water-crude Oil in a Rectangular ‎Y-microchannel [Volume 8, Issue 2, 2022, Pages 655-670]
  • Pryazhnikov, Maxim I. Flow Regimes Characteristics of Water-crude Oil in a Rectangular ‎Y-microchannel [Volume 8, Issue 2, 2022, Pages 655-670]
  • Pryazhnikov, M.I. Numerical Investigation of Enhanced Oil Recovery from various ‎Rocks by Nanosuspensions Flooding [Volume 8, Issue 1, 2022, Pages 306-318]
  • Puneeth, V. Theoretical Study of Convective Heat Transfer in Ternary ‎Nanofluid Flowing past a Stretching Sheet [Volume 8, Issue 4, 2022, Pages 1279-1286]
  • Purbolaksono, Judha Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]

Q

  • Qian, Zhenghua Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]

R

  • Rabbani, Kianoush A Closed-Form Solution for Electro-Osmotic Flow in Nano-Channels [Volume 8, Issue 2, 2022, Pages 510-517]
  • Rabbani, Omar A Kinetic Flux-vector Splitting Scheme for Two-layer Shallow Flow Model [Volume 8, Issue 3, 2022, Pages 1043-1053]
  • Radi, Enrico Pull-in Instability Analysis of a Nanocantilever Based on the ‎Two-Phase Nonlocal Theory of Elasticity [Volume 8, Issue 4, 2022, Pages 1456-1466]
  • Rahnama, Saeed Theoretical and Experimental Investigation on Mechanical Behavior of Aluminum to Aluminum Tubular Bonded Lap Joint under Pure Torsion and a Finite Element Comparison with Hybrid Rivet/Bonded Joint [Volume 8, Issue 2, 2022, Pages 485-492]
  • Rakhshkhorshid, Masoud Evaluating the Delamination in the Drilling Process of a Melamine Coated Medium Density Fiberboard (MDF) [Volume 8, Issue 1, 2022, Pages 1-10]
  • Ramachandra Prasad, V. Polymeric Dissipative Convection Flow from an Inclined Plane with Chemical Reaction: Numerical Study [Volume 8, Issue 2, 2022, Pages 416-428]
  • Ramesh, G.K. Magneto Casson-Carreau Fluid Flow through a Circular Porous ‎Cylinder with Partial Slip‎ [Volume 8, Issue 4, 2022, Pages 1208-1221]
  • Ramezannejad Azarboni, Habib Nonlinear Primary Frequency Response Analysis of Self-‎Sustaining Nanobeam Considering Surface Elasticity [Volume 8, Issue 4, 2022, Pages 1196-1207]
  • Rana, Puneet Non-similar Radiative Bioconvection Nanofluid Flow under ‎Oblique Magnetic Field with Entropy Generation‎ [Volume 8, Issue 1, 2022, Pages 206-218]
  • Rassoli, Aisa Characterization of the Nonlinear Biaxial Mechanical Behavior ‎of Human Ureter using Constitutive Modeling and Artificial ‎Neural Networks [Volume 8, Issue 4, 2022, Pages 1186-1195]
  • Rehman, Asad A Kinetic Flux-vector Splitting Scheme for Two-layer Shallow Flow Model [Volume 8, Issue 3, 2022, Pages 1043-1053]
  • Reza, Arash A Modified Couple Stress-Based Model for the Nonlinear ‎Vibrational Analysis of Nano-Disks Using Multiple Scales Method [Volume 8, Issue 2, 2022, Pages 580-596]
  • Rezaei, Mehdi Design, Analysis and Manufacturing of a Bone Cutting Ultrasonic Horn-Tool and Verification with Experimental Tests [Volume 8, Issue 2, 2022, Pages 438-447]
  • Rizov, Victor Effects of Periodic Loading on Longitudinal Fracture in ‎Viscoelastic Functionally Graded Beam Structures‎ [Volume 8, Issue 1, 2022, Pages 370-378]
  • Rogolino, P. Analysis of a Hyperbolic Heat Transfer Model in Blood-perfused ‎Biological Tissues with Laser Heating [Volume 8, Issue 4, 2022, Pages 1398-1406]
  • Roy, S. Magnetized Bi-convective Nanofluid Flow and Entropy ‎Production Using Temperature-sensitive Base Fluid Properties:‎ A Unique Approach [Volume 8, Issue 4, 2022, Pages 1163-1175]

S

  • Sánchez Lozano, Miguel Mechanical Characterisation and Comparison of Hyperelastic ‎Adhesives: Modelling and Experimental Validation [Volume 8, Issue 1, 2022, Pages 359-369]
  • Saberi Varzaneh, Ali Experimental and Finite Element Study to Determine the ‎Mechanical Properties and Bond Between Repair Mortars and ‎Concrete Substrates [Volume 8, Issue 2, 2022, Pages 493-509]
  • Sae-Long, Worathep Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
  • Sahu, Abhishek Transient Response of Longitudinal Fins under Step Changes in ‎Base Temperature and Heat Flux using Lattice Boltzmann ‎Method [Volume 8, Issue 3, 2022, Pages 925-939]
  • Sahu, Sanjeev A. Scattering and Backscattering Study of Mechanical Plane Wave in Composite Materials Plates (Earth model 1066B and LiNbO3) [Volume 8, Issue 2, 2022, Pages 518-527]
  • Sakhri, Nasreddine Heating Capacity of an Earth to Air Heat Exchanger in Arid Regions - Experimental Investigation [Volume 8, Issue 2, 2022, Pages 429-437]
  • Sankar, D.S. Mathematical Analysis of Poiseuille Flow of Casson Fluid past Porous Medium [Volume 8, Issue 2, 2022, Pages 456-474]
  • Sankar, D.S. Theoretical Study on Poiseuille Flow of Herschel-Bulkley Fluid in ‎Porous Media‎ [Volume 8, Issue 4, 2022, Pages 1246-1269]
  • Sarego, Giulia A Stress Tensor-based Failure Criterion for Ordinary State-based ‎Peridynamic Models‎ [Volume 8, Issue 2, 2022, Pages 617-628]
  • Saw, Lip Huat Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]
  • Schramm, Alexander Multibody Efficiency Analysis of Chain Drives in Racing Motorcycles [Volume 8, Issue 3, 2022, Pages 1091-1102]
  • Semenov, Alexey Strength of Steel Shell Cylindrical Panels Reinforced with an ‎Orthogonal Grid of Stiffeners [Volume 8, Issue 2, 2022, Pages 723-732]
  • Semenov, Alexey Dynamic Buckling of Stiffened Shell Structures with Transverse ‎Shears under Linearly Increasing Load [Volume 8, Issue 4, 2022, Pages 1343-1357]
  • Setoudeh, Farbod A Deep Learning Approach to Predict the Flow Field and Thermal ‎Patterns of Nonencapsulated Phase Change Materials ‎Suspensions in an Enclosure‎ [Volume 8, Issue 4, 2022, Pages 1270-1278]
  • Seyfi, Behzad Characterization of the Nonlinear Biaxial Mechanical Behavior ‎of Human Ureter using Constitutive Modeling and Artificial ‎Neural Networks [Volume 8, Issue 4, 2022, Pages 1186-1195]
  • Shahmansoorian, Aref Chaos Control in Gear Transmission System using GPC and SMC ‎Controllers [Volume 8, Issue 2, 2022, Pages 545-556]
  • Shahrooi, Shahram A Modified Couple Stress-Based Model for the Nonlinear ‎Vibrational Analysis of Nano-Disks Using Multiple Scales Method [Volume 8, Issue 2, 2022, Pages 580-596]
  • Shariati, Mojtaba Size Effect on the Axisymmetric Vibrational Response of ‎Functionally Graded Circular Nano-Plate Based on the Nonlocal Stress-Driven Method [Volume 8, Issue 3, 2022, Pages 962-980]
  • Shariff, M.H.B.M. Finite Deformations of Fibre-reinforced Elastic Solids with ‎Fibre Bending Stiffness: A Spectral Approach [Volume 8, Issue 4, 2022, Pages 1332-1342]
  • Sharifi Teshnizi, Ebrahim Analytical Solutions and Analyses of the Displacement ‎Separating Point in Diffusers [Volume 8, Issue 3, 2022, Pages 891-903]
  • Sharma, Ram Prakash MHD Non-Newtonian Fluid Flow past a Stretching Sheet under ‎the Influence of Non-linear Radiation and Viscous Dissipation [Volume 8, Issue 3, 2022, Pages 949-961]
  • Sharma, R.P. Metal and Metallic Oxide Nanofluid over a Shrinking Surface with ‎Thermal Radiation and Heat Generation/Absorption [Volume 8, Issue 2, 2022, Pages 557-565]
  • Shashi Prabha Gogate, S. Numerical Study of Three-dimensional Boundary-layer Flow over ‎a Wedge: Magnetic Field Analysis [Volume 8, Issue 3, 2022, Pages 876-890]
  • Shaw, Sachin MHD Non-Newtonian Fluid Flow past a Stretching Sheet under ‎the Influence of Non-linear Radiation and Viscous Dissipation [Volume 8, Issue 3, 2022, Pages 949-961]
  • Shi, Zhifei A Simplified Analytical Method for Detuning Periodic Pile Barriers [Volume 8, Issue 4, 2022, Pages 1480-1487]
  • Shishesaz, Mohammad A Modified Couple Stress-Based Model for the Nonlinear ‎Vibrational Analysis of Nano-Disks Using Multiple Scales Method [Volume 8, Issue 2, 2022, Pages 580-596]
  • Shishesaz, Mohammad Size Effect on the Axisymmetric Vibrational Response of ‎Functionally Graded Circular Nano-Plate Based on the Nonlocal Stress-Driven Method [Volume 8, Issue 3, 2022, Pages 962-980]
  • Shojaei, Arman A Stress Tensor-based Failure Criterion for Ordinary State-based ‎Peridynamic Models‎ [Volume 8, Issue 2, 2022, Pages 617-628]
  • Shokri, Ali Nonstandard Dynamically Consistent Numerical Methods for ‎MSEIR Model [Volume 8, Issue 1, 2022, Pages 196-205]
  • Shukla, Nisha Non-similar Radiative Bioconvection Nanofluid Flow under ‎Oblique Magnetic Field with Entropy Generation‎ [Volume 8, Issue 1, 2022, Pages 206-218]
  • Sibanda, Precious Effect of Cattaneo-Christov Heat Flux on Radiative ‎Hydromagnetic Nanofluid Flow between Parallel Plates using ‎Spectral Quasilinearization Method [Volume 8, Issue 3, 2022, Pages 865-875]
  • Sim, Lih Chi Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]
  • Simon Portillo, Francisco J. Mechanical Characterisation and Comparison of Hyperelastic ‎Adhesives: Modelling and Experimental Validation [Volume 8, Issue 1, 2022, Pages 359-369]
  • Singhal, Abhinav Scattering and Backscattering Study of Mechanical Plane Wave in Composite Materials Plates (Earth model 1066B and LiNbO3) [Volume 8, Issue 2, 2022, Pages 518-527]
  • Siriyothai, Patcharakon A Study of Curved Louver Fin Configuration for ‎Heat Transfer Enhancement [Volume 8, Issue 2, 2022, Pages 754-763]
  • Sivaraj, R. Stability Analysis of Casson Nanofluid Flow over an Extending/Contracting ‎Wedge and Stagnation Point [Volume 8, Issue 2, 2022, Pages 566-579]
  • Sobamowo, Gbeminiyi Thermal Analysis of Radiating Film Flow of Sodium Alginate ‎using MWCNT Nanoparticles ‎ [Volume 8, Issue 1, 2022, Pages 219-231]
  • Sobamowo, Gbeminiyi M. Combined Impacts of Fin Surface Inclination and ‎Magnetohydrodynamics on the Thermal Performance of a Convective-Radiative Porous Fin‎ [Volume 8, Issue 3, 2022, Pages 940-948]
  • Sodagar, Sina Investigation on the Crack Effect in the Cylinder and Matrix on the Backscattering Field Frequency Specifications using the Finite Element Method [Volume 8, Issue 2, 2022, Pages 448-455]
  • Soroushian, Aram Reduction in Space for Dynamic Finite Element Analysis of Assemblies of Beam-columns when the Mass is Available in Digitized Format [Volume 8, Issue 1, 2022, Pages 71-83]
  • Soufivand, Mohammad Reza An Experimental Comparison between Wing Root and Wingtip ‎Corrugation Patterns of Dragonfly Wing at Ultra-low Reynolds ‎Number and High Angles of Attack‎ [Volume 8, Issue 4, 2022, Pages 1176-1185]
  • Srivastava, Prakash C. Numerical Scheme based on Non-polynomial Spline Functions for ‎the System of Second Order Boundary Value Problems arising in ‎Various Engineering Applications [Volume 8, Issue 1, 2022, Pages 144-152]
  • S. Roknizadeh, S. Alireza Size Effect on the Axisymmetric Vibrational Response of ‎Functionally Graded Circular Nano-Plate Based on the Nonlocal Stress-Driven Method [Volume 8, Issue 3, 2022, Pages 962-980]
  • Stefanović-Marinović, Jelena Research into the Properties of Selected Single Speed Two-Carrier ‎Planetary Gear Trains [Volume 8, Issue 2, 2022, Pages 699-709]
  • Stepenko, Nikolai A. Stability Analysis of Gyroscopic Systems with Delay under ‎Synchronous and Asynchronous Switching [Volume 8, Issue 3, 2022, Pages 1113-1119]
  • Sukontasukkul, Piti Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
  • Sultana, Mafruza Scattering and Backscattering Study of Mechanical Plane Wave in Composite Materials Plates (Earth model 1066B and LiNbO3) [Volume 8, Issue 2, 2022, Pages 518-527]
  • Sysyn, Mykola Studying the Strengthening Effect of Railway Ballast in the ‎Direct Shear Test due to Insertion of Middle-size Ballast Particles [Volume 8, Issue 4, 2022, Pages 1387-1397]

T

  • Tagimalek, Hadi A Hybrid SVM-RVM Algorithm to Mechanical Properties in the Friction Stir Welding Process [Volume 8, Issue 1, 2022, Pages 36-47]
  • Tantawy, Rania Effect of Porosity and Hygrothermal Environment on FGP ‎Hollow Spheres under Electromechanical Loads [Volume 8, Issue 2, 2022, Pages 710-722]
  • Tavakoli, Mohammad Bagher A Deep Learning Approach to Predict the Flow Field and Thermal ‎Patterns of Nonencapsulated Phase Change Materials ‎Suspensions in an Enclosure‎ [Volume 8, Issue 4, 2022, Pages 1270-1278]
  • Tey, Jing Yuen Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]
  • Tica, Milan Research into the Properties of Selected Single Speed Two-Carrier ‎Planetary Gear Trains [Volume 8, Issue 2, 2022, Pages 699-709]
  • Tkachenko, Denys Spectral Methods Application in Problems of the Thin-walled ‎Structures Deformation [Volume 8, Issue 2, 2022, Pages 641-654]
  • Torkhov, Nikolay Anatolevich Reducing the Wear of the UHMWPE Used in the Total Hip ‎Replacement after Low-Pressure Plasma Treatment [Volume 8, Issue 3, 2022, Pages 1035-1042]
  • Tounsi, Abdelouahed On the Thermo-elastic Response of FG-CNTRC Cross-ply ‎Laminated Plates under Temperature Loading using a New HSDT‎ [Volume 8, Issue 4, 2022, Pages 1370-1386]
  • Troha, Sanjin Research into the Properties of Selected Single Speed Two-Carrier ‎Planetary Gear Trains [Volume 8, Issue 2, 2022, Pages 699-709]
  • Tsegelnyk, Yevgen Spectral Methods Application in Problems of the Thin-walled ‎Structures Deformation [Volume 8, Issue 2, 2022, Pages 641-654]

V

  • Vasilets, Victor Nikolaevich Reducing the Wear of the UHMWPE Used in the Total Hip ‎Replacement after Low-Pressure Plasma Treatment [Volume 8, Issue 3, 2022, Pages 1035-1042]
  • Venkateswarlu, B. Magneto Casson-Carreau Fluid Flow through a Circular Porous ‎Cylinder with Partial Slip‎ [Volume 8, Issue 4, 2022, Pages 1208-1221]
  • Verdete, Marta Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading [Volume 8, Issue 1, 2022, Pages 388-404]
  • Vikram, P. Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
  • Viswanathan, K.K. Mathematical Analysis of Poiseuille Flow of Casson Fluid past Porous Medium [Volume 8, Issue 2, 2022, Pages 456-474]
  • Viswanathan, K.K. Theoretical Study on Poiseuille Flow of Herschel-Bulkley Fluid in ‎Porous Media‎ [Volume 8, Issue 4, 2022, Pages 1246-1269]
  • Vrcan, Željko Research into the Properties of Selected Single Speed Two-Carrier ‎Planetary Gear Trains [Volume 8, Issue 2, 2022, Pages 699-709]

W

  • Waini, Iskandar Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
  • Wang, Hai Dynamic Response of Functionally Graded Carbon ‎Nanotube-Reinforced Hybrid Composite Plates [Volume 8, Issue 1, 2022, Pages 182-195]
  • Wang, Ji An Analysis of Nonlinear Beam Vibrations with the Extended ‎Rayleigh-Ritz Method [Volume 8, Issue 4, 2022, Pages 1299-1306]
  • Wang, Ping Studying the Strengthening Effect of Railway Ballast in the ‎Direct Shear Test due to Insertion of Middle-size Ballast Particles [Volume 8, Issue 4, 2022, Pages 1387-1397]
  • Wanglertpanich, Kiatbodin A Study of Curved Louver Fin Configuration for ‎Heat Transfer Enhancement [Volume 8, Issue 2, 2022, Pages 754-763]
  • Wu, Rongxing An Analysis of Nonlinear Beam Vibrations with the Extended ‎Rayleigh-Ritz Method [Volume 8, Issue 4, 2022, Pages 1299-1306]

Y

  • Yaghootian, Amin Investigation on the Crack Effect in the Cylinder and Matrix on the Backscattering Field Frequency Specifications using the Finite Element Method [Volume 8, Issue 2, 2022, Pages 448-455]
  • Yakimov, Anton S. Flow Regimes Characteristics of Water-crude Oil in a Rectangular ‎Y-microchannel [Volume 8, Issue 2, 2022, Pages 655-670]
  • Yang, Lung-Jieh Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
  • Yazdanian, Milan Thermal Performance of Oscillating Blade with Various ‎Geometries in a Straight Channel [Volume 8, Issue 1, 2022, Pages 114-128]
  • Yeo, Wei Hong Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]
  • Yew, Ming Chian Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]
  • Yooyen, Soemsak A Stress Tensor-based Failure Criterion for Ordinary State-based ‎Peridynamic Models‎ [Volume 8, Issue 2, 2022, Pages 617-628]
  • Yousefi, Mohammad Numerical Simulation of Unsteady Flow toward a Stretching/Shrinking Sheet in Porous Medium Filled with a Hybrid Nanofluid [Volume 8, Issue 1, 2022, Pages 11-20]
  • Yousefi, Mohiedin Theoretical and Experimental Investigation on Mechanical Behavior of Aluminum to Aluminum Tubular Bonded Lap Joint under Pure Torsion and a Finite Element Comparison with Hybrid Rivet/Bonded Joint [Volume 8, Issue 2, 2022, Pages 485-492]

Z

  • Zainal, Nurul Amira Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
  • Zenkour, Ashraf M. Effect of Porosity and Hygrothermal Environment on FGP ‎Hollow Spheres under Electromechanical Loads [Volume 8, Issue 2, 2022, Pages 710-722]
  • Zhou, Jiahua A Simplified Analytical Method for Detuning Periodic Pile Barriers [Volume 8, Issue 4, 2022, Pages 1480-1487]
  • Zia, Saqib A Kinetic Flux-vector Splitting Scheme for Two-layer Shallow Flow Model [Volume 8, Issue 3, 2022, Pages 1043-1053]